home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Experimental BBS Explossion 3
/
Experimental BBS Explossion III.iso
/
gus
/
lolsound.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1993-08-11
|
2KB
|
64 lines
LANDS OF LORE
Multiple Sound Device Patch (Beta)
(08/11/93)
This patch will allow you to play Lands Of Lore music and sound effects on
more than one audio sound device at one time. Simply follow the directions
listed below.
ATTENTION! THIS IS AN OPTIONAL PATCH. IT IS NOT REQUIRED TO PLAY THE GAME.
It is intended only for users that own and use more than one sound device
or card at a time. If you only use one sound device, you do not need this
patch.
1. Backup the following files...
LANDS.CFG, SETUP.EXE, and SETUPENG.DIP
These files can be found on your hard drive in the directory where you
installed Lands Of Lore.
2. Copy the new LANDS.CFG, SETUP.EXE, and SETUPENG.DIP into the directory
where Lands of Lore is stored.
3. Run SETUP.EXE and configure your sound devices. When using two different
sources for sound output, memory requirements will be high. To run LANDS
of LORE, we recommend at least 621,000 bytes of free lower memory. It is
enitrely possible that your configuration will require more or less than
this amount, so don't be afraid to experiment to find your optimal setup.
4. Exit out of the SETUP.EXE program after you have made all of your choices.
After exiting out of the SETUP.EXE program, simply type LANDS start the game.
PLEASE REMEMBER that this is a beta version of the mixed sound support patch.
We appreciate your comments regarding any mixed sound problems you may
encounter.
CREATIVE LABS WAVEBLASTER OWNERS:
As of 08/11/93 this patch has been updated to support Sound Blaster 16
and Wave Blaster owners. To receive mixed sound support (digitized
sound from the SB16, and music from the Wave Blaster) do the following:
1. Follow steps 1 - 3 as shown above.
2. In the SETUP program assign sound (music) option to
Sound Canvas (General MIDI), sound effect option to SBPRO, and
digitized option to SBPRO.
3. After exiting SETUP.EXE, copy the files LOLWAVE.BAT and LOLWAVE.DAT
to your LANDS of LORE directory.
4. Type LOLWAVE anytime you wish to play LANDS of LORE in
Wave Blaster/SB16 mode.
-Westwood Studios Audio Department-